http://www.chowhe.com.cn

3.5” TOP ENTRY CPU EQUALIZER WITH COIN REJECT LEVER.

CH-268T  TOP ENTRY ELECTROIC COIN SELECTOR .

Drop Inserting Type.

??nbsp;   Capable of accepting all size of coins ??okens.

??nbsp;   Select coin by Diameter, Thickness ??etal Content.

??nbsp;   CPU anti-string programs presetting against fraud .

??nbsp;   3 ways switch of coin triggering time duration.

??nbsp;   Adjustable VR tunning for sensitivity of coin acceptance.

??nbsp;   Inhibit Line enable accept command from Host Machine.

??nbsp;   Allow to connect to Counter(Meter).

??nbsp;   Optional DC+24V ??C Power upon buyer request.

CPU EQUALIZER + COIN REJECT LEVER

??nbsp;   CPU anti-string programs by lock operation against fraud .

??nbsp;   Prevent host machine from Slugs ??Wire-stringing ??Tricks.

??nbsp;   Coin drop speed ??timing preset in ????hape sliding passage CPU lock against unusual move??bnormal stay ??everse draw 500ms ~ 5 seconds lock out along with operation auto-recovery.

??nbsp;   Compatible with wide variety of Cabinet, Door ??rame.

??nbsp;   Coin diameter double check in slot opening ??id entrance by diameter-rail ??ampling clamp for preventing bigger invalid coin from inserting .

??nbsp;   Spring lid-wiring fully sweep sluggish coins off passage by reject lever for free from coin jam.

??nbsp;   More than millions times strong stroke durability of solenoid for the best performance of coin selecting .

        Voltage : DC+12V

        Coin Diameter : 18mm~33mm

        Coin thickness : 1.2mm~3.3mm

USER GUIDE:

1.      Replace yellow plastic token to the correct coin as wish to accept in sampling clamp.

2.      Adjust diameter-rail of lid for preventing bigger invalid coins from inserting.

3.      Drive screw of lid-wing if coin thickness more than 2.5mm.

4.      Connect loom to host machine as following lines guide :

White line—(N.C. signal)

Green line—(N.O. signal)

Gray line—Counter (Meter)

Yellow line—inhibit/low(<+1V)

Red line—Power DC +12V

Black Line—Ground (GND)

5.      Switch Time Duration for correct triggering of coin acceptance if necessary .

Long duration of Pulse   :. 100ms

Common duration of Pulse : 50ms

Short duration of Pulse    :20ms

6.      VR tunning for sensitivity of coin acceptance.

Turn clockwiste (+) for slack acceptance.

Turn anti-clockwise(-) for tight acceptance.